Aftermarket parts

[RazorEdgeDesign]

I would like to start a thread regarding the companies we have used to outfit our H2. Who all have you purchased from, and what parts have you found?
Area 15 Designs - bumpers, kickers.
864Offroad LLC - wheels and tires.
Tony Thrillville THRILLVILLE OASIS Powersports - dealer
TQR - cage
Murray Powersports - graphics
Atu Dustin Robbins - tender spring kit
crushinoffroad - LEDS
KeepItRad - windshiled
Razor Edge Design - LED GRILL, Hood replacement, Intake covers, seat brackets. Exhaust covers, Folding Tailgate!
Right Coast Offroad - Clutch plate and belt

 

[MFortie]

Kaw storage box / tire carrier / spare
PCI radio/intercom
Axia Alloy mounts
Bent Metal windshield / wiper kit
5150 whips
SSVWorks Alpha 12 switcher
Baja Designs lights
Chupacabra mirrors
RED intake covers
Right Coast clutch plate / titanium bolts
BLR Tuning tow hooks

Working on getting all this installed for our ride over MLK weekend. Deep in the radio/IC at the moment and not thinking I’ll get the switcher or lights installed beforehand. Don’t really need them for this trip. Casual break-in ride…

 

[RazorEdgeDesign]

Once installed, make sure to get a pic! Enjoy your ride!

 

[STPH2]

Kaw storage box / tire carrier / spare
PCI radio/intercom
Axia Alloy mounts
Bent Metal windshield / wiper kit
5150 whips
SSVWorks Alpha 12 switcher
Baja Designs lights
Chupacabra mirrors
RED intake covers
Right Coast clutch plate / titanium bolts
BLR Tuning tow hooks

Working on getting all this installed for our ride over MLK weekend. Deep in the radio/IC at the moment and not thinking I’ll get the switcher or lights installed beforehand. Don’t really need them for this trip. Casual break-in ride…

Quite a haul. You will be busy. How do you like the Kaw box? I have been looking at it for a few days now but have not seen it available yet. Do you know when it will be available ?

 

[STPH2]

I have an ever growing list but so far for Phase 1 I have:
Front and rear Kawasaki windshield
Kawasaki review mirror with dome light
Front Light pod mounts with BD LP4 lights
Chupacabra Cuero Race UTV Side Mirrors
Garmin power switch (yet to be installed) Plan is to have all switches go through the Tread. Pretty stoked about this.
Made the mistake of getting a 40 inch BD light bar but looking to return and get the 45 inch KC hiLites

 

[MFortie]

Quite a haul. You will be busy. How do you like the Kaw box? I have been looking at it for a few days now but have not seen it available yet. Do you know when it will be available ?

Haven’t even opened the box yet. I’m working on getting the IC cables and antenna lead routed along with any electrical before mounting the box.

I ordered the ‘Recreation’. package with the car and it took about a month to come in.

 

[Sand Shark]

Keeping this one simple and not going overboard.

Just added:

Rugged Radio/Intercom set up,
Baja Design XL80s on the a-pillar
Chupacabra rear view mirror
Axia Alloy side mirrors
5150 whips - have not wired the lighted whips, just running the day time whips for now

Probably going to add a TMW front bumper and put a pair of XL80s on the bumper.

 

[RazorEdgeDesign]

Keeping this one simple and not going overboard.

Just added:

Rugged Radio/Intercom set up,
Baja Design XL80s on the a-pillar
Chupacabra rear view mirror
Axia Alloy side mirrors
5150 whips - have not wired the lighted whips, just running the day time whips for now

Probably going to add a TMW front bumper and put a pair of XL80s on the bumper.

We can get ya set up with a led grill! Check it out razoredgedesign.net

 

[Nikal]

Between the bumper, winch & light mounted in the grill, I’d be concerned with radiator temps. Out on the West Coast we run long fast straights, sand dunes and miles of top speed whoops and open desert. Just looking at the light and grill mount surface area, I’d suspect you have removed 25% of the air flow through the grill opening. Thats not including the grill design blocking more air vs stock.

Just something to think about for the West Coast customers.