Recent content by Beasy

I removed factory pressure valve and installed the rollover valve, went on a couple big rides including windrock. Ran vent line to the rear. I took a pretty sturdy fuel tank and added a connector to it so I can run vent line to it . I keep the vent off the fuel tank barely cracked open. It's...

Thanks for heads-up, I haven't ordered anything yet, just trying to figure out which setup I'm going to try. I did find a cheaper vapor canister on Amazon earlier today at work.

I'm going to try this , works on vehicles!

A lot good information 🤘. Ok gotcha on running a line off of fuel cap and run to the back. My only issue with the factory pressure release valve is that it makes the fuel cap a bitch to get off lol. I'm definitely going to do like you did on running the vent line to the rear. I agree on the...

Definitely a good possibility on vent line size !! I'm not really sure on doing the vented gas cap , your passenger will get hit first with the fumes! Then you will most likely have too much venting in the cab . Unless you plan on running a line through you skid plate and let it hang towards the...

Running front and rear windshield and full cab enclosure. I'm not sure what the torque specs are on the fuel pump cover, but I turned all bolts down probably a good full turn , they definitely wasn't tight at all. I put the vent valve back on as well , air pushes through it with air compressor...

Yes, and a full enclosure. And rear windshield. I went on many rides with fully enclosed and never smelled fuel . Something is definitely leaking, no way it went from no fuel smell to fuel smell without a leak from a cut line or loose fitting or fuel pump . I'm ok with those options, it's the...

Definitely wild on why now ! Only thing I done differently is just added different tires on and rollover valve. With a little over 1,1,00 miles on it . Weather could possibly change the elements of all what's going on , just having the right conditions. But I still think it's something that we...

Hey AXE . I put the rollover valve in and I'm starting to think it's not the problem completely, something is telling me it's the overflow valve vent line, I believe fuel is easily being push out and running down the frame , especially on a full tank. Experienced this yesterday, it was bad ...

Hey AXE . I put the rollover valve in and I'm starting to think it's not the problem completely, something is telling me it's the overflow valve vent line, I believe fuel is easily being push out and running down the frame , especially on a full tank. Experienced this yesterday, it was bad ...