Dragoon's latest activity
-
Evo says the fan blade is to be installed using blue loctite on the screws. It is shipped unassembled as they had problems with the... -
I had bone stock clutching and 35 inch SS365 tires. This was one of the steepest parts of China Wall and had a lot of soft loose sand at...
-
When I ran mine up China Wall I was in the upper 40mph range at the top that was with a run through the whoops. My belt snapped...
-
Dragoon replied to the thread Catching Some Air.Nice! Was that at WOT cresting the top of the Wall, or did you have enough power to choose your speed? Do you know about what MPH you...
-
A few weeks ago I decided to run my H2 a little harder once I hit 500 miles. I took her off one of the steeper runs at China Wall and...
-
Dragoon reacted to Nikal's post in the thread Stop sale notice on All Kawasaki Teryx Vehicles with
Like.
Here’s what your formal Kawasaki Teryx H2 consumer Stop Ride Recall letter will say. -
Dragoon reacted to El Chorizo's post in the thread Stop sale notice on All Kawasaki Teryx Vehicles with
Wow.
Will update more once we have more information..... but this is a big deal. -
If anybody is waiting for or looking for a Tapp clutch from Evo, they finally got all the parts they needed to produce and deliver the...
-
I figured I would start a thread with a list of the available aftermarket clutches: So far we have: Tapp LaRue and KWI will be...
-
EVO now has a clutch cover modification so you can run the Tapp secondary with the OEM clutch cover.
-
I decided to order the TAPP primary & secondary (along with the tools) from Evo. Their cover mod is supposed to be available in a week...
-
Right Coast off road has a stronger clutch cover and talks about the cracks and towers This is a good one too where he shows the wear...
-
Dragoon replied to the thread Failing clutches..Now that's some carnage! Scary stuff!
-
These clutch failures are continuing and getting more dangerous. Another one blew up this weekend and thankfully the driver did not have...
-
Yea, when I found out that every axle is different I was a bit surprised but when you look at the placement of the motor it makes sense...