Raidernut's latest activity
-
Raidernut replied to the thread TAPP Clutch Install.Rpm.fan -
Raidernut replied to the thread Tapp primary and secondary update.I used the RPM fan not the razorback. The razorback is same diameter as the intake tube where the rpm is much larger allowing air at...
-
So I got a chance to test out tapp primary and secondary this weekend in glamis with 100 degree temps. I also installed the RPM blower...
-
Raidernut replied to the thread CVT Temp Guage Actuals.Agreed on that inlet. Will definitely report back. All of you have been a big help so my turn to give back
-
Raidernut replied to the thread TAPP Clutch Install.Been there done that already. Inner and out covers at the same time plus belt is not cheap. I have high hopes for the primary and...
-
Raidernut replied to the thread CVT Temp Guage Actuals.Going to try the rpm fan this weekend. Hoping that will help cool everything down quickly after coming to a stop like it did on my pro r
-
Raidernut replied to the thread TAPP Clutch Install.I will be in glamis this weekend. Temperature supposed to be high 90s. I will be testing tapp primary and secondary g boost belt with...
-
Raidernut replied to the thread TAPP Clutch Install.Appreciate your input!
-
Raidernut replied to the thread TAPP Clutch Install.The spacer just pushes in like a collar in the front hole of primary correct?
-
Raidernut replied to the thread TAPP Clutch Install.Ya your right thats were i saw it. Not kidding that is a game changer. Sorry but Im not trying to jack up a trailing arm in the dunes. I...
-
Raidernut replied to the thread TAPP Clutch Install.Ya I did the light lapping as well, and thoroughly cleaned the shaft and primary. Not sure why it keeps backing off a bit. Also...
-
Raidernut replied to the thread TAPP Clutch Install.Also wanted to add i took the advice from a post I had read and removed the snorkel that attaches to inner cvt cover. Siliconed the...
-
Raidernut replied to the thread TAPP Clutch Install.Got my clutches installed today and thanks to alot of tips from this thread was painless. Ended up with all 8 screws installed and #2 on...
-
Raidernut replied to the thread TAPP Clutch Install.If im reading your picture from tapp correctly it says they do recommend running it? Not sure why you said they dont